info@insperla.net
Inquire Certificate
Türkçe
Home page
About us
Test
Non Destructive Testing
Visual Test
Penetrant Test
Magnetic Particle Testing
Ultrasonic Testing
Ultrasonic Thickness Measurement
Radiographic Testing
Time Of Flight Diffraction (TOFD) & Phased Array Ultrasonic (PAUT) Testing
Eddy Current Testing
Portable Hardness Test
Vacuum Test
Helium Leak Test
PMI (Positive Material Identification)
Precise Dimensional Control with Total Station
Destructive Inspection
Tensile Test
Bend Test
Charpy-V Notch Test
Hardness Test
Macro Examination
Micro Examination
Chemical Testing and Analysis
Replica Testing
Inspection
Third Party Inspection Services
Inspection Services for Steel and Aluminium Structure
Welded Production Inspection Service
Inspection Services for Power Plants
Refineries and Chemical Facilities Inspection Services
Inspection Services for Storage Tanks (API650 & API653)
Inspection Services for Pipe Lines (API 570)
Risk Based Inspections (RBI)
Natural Stone Inspection (Marble, Granite etc.)
Wood Inspections
Second Party Inspection Services
Project Management
Certification
Management System Certifications
EN ISO 3834 Certification
EN 15085 Railway Certification
ISO 9001:2015
ISO 14001:2015
ISO 45001
ISO 10002
OHSAS 18001 / ISO 45001
CE Certification
Pressure Vessels Directive 2014/68/EU
Simple Pressure Vessels Directive 2014/29/EU
Construction Products Regulation 305/2011
Machinery Directive 2006/42/AT
Gas Burning Devices Regulation 2016/ 426/AB
Directive on Hot Water Boilers
Low Voltage Directive (LVD) 2014/35/EU
Elektromagnetic Compatibility Directive (EMC) 2014/30/EU
ATEX Directive 2014/34/EU
Recreational Craft and Personal Watercraft 2013/53/AB
Personal Protective Equipment Directive 2016/425
Radio Equipment Directive RED, 2014/53/EU
Regulation on Medical Devices 2017/745/AB
Toy Safety Directive 2009/48/EC
Welding Documentation
Welder Certification
Welding Procedure Approval (WPQR)
Brazer Certification
Brazing Procedure Approval (BPQR)
Training
Training Services for Non-Destructive Testing Personnel within the Scope of EN ISO 9712
Visual Test – VT Level I, II, III
Penetrant Test – PT Level I, II, III
Magnetic Testing – MT Level I, II, III
Ultrasonic Testing – UT Level I, II, III
Radiographic Testing – RT Level I, II, III
TOFT Phased Array
Welding Trainings
Welding Supervisor Training under ISO 14731
Theoretical Welding Trainings within the Scope of ISO 9606-1 and EN 15614-1
CSWIP 3.1 Welding Inspector Preparation Trainings
Pressure Vessel Trainings
Pressure Vessel Design Training
Pressure Vessel Manufacturing and Control Training
Pressure Vessel and Boiler Periodic Control Training
Basic Welding Training Under ASME Sec IX
Storage Tank Trainings
Basic Training Under API 650
Basic Training Under API 653
API 653 ICP Training
API 570 ICP Exam Preparation Training
engineering
Pressure Vessel Design Calculations
Finite Element Method Analysis of Steam Boiler, Hybrid Boilers
Finite Element Method Analysis of Machine, Lifting Devices
Finite Element Method Analysis of Non-Standard Products
Documents
News
Contact
Testing Services
Home page
Testing Services
Insperla
Non Destructive Testing
Visual Test
Visual testing & inspection (VT) of welding is the most effective of the..
Penetrant Test
Penetrant test is an effective method for the determination of surfac..
Magnetic Particle Testing
The Magnetic Particle Test is an effective method for the determination ..
Ultrasonic Testing
Ultrasonic inspection detects the discontinuities with the logic of the ..
Ultrasonic Thickness Measurement
It is the measurement of the thickness of the material with sound accord..
Radiographic Testing
Radiographic examination is one of the most effective volumetric examina..
Time Of Flight Diffraction (TOFD) & Phased Array U..
With Phased Array Ultrasonic (PAUT) method, 3-dimensional control of the..
Eddy Current Testing
It is used to detect the surface and volumetric defects of the material ..
Portable Hardness Test
It is an inspection method that allows hardness testing of materials in ..
Vacuum Test
It is an effective method applied for the tightness control of the botto..
Helium Leak Test
The leak test of the products that require a sensitive level of tightnes..
PMI (Positive Material Identification)
It is used for the detection of chemical alloys in the material. We can ..
Precise Dimensional Control with Total Station
It is a dimensional reporting service by measuring products and structur..
Insperla
Destructive Inspection
Tensile Test
The samples prepared according to EN and ASME standards are connected to..
Bend Test
It is an effective method for determining the deformation capabilities o..
Charpy-V Notch Test
The resistance of materials and welds against sudden impacts is measured..
Hardness Test
With the hardness test, the resistance of the material or weld to plasti..
Macro Examination
The macro test is an effective method for the evaluation of the heat-aff..
Micro Examination
Industrial processes and treatments such as casting, welding and heat tr..
Chemical Testing and Analysis
It is the measurement of the chemical composition of the metallic materi..
Replica Testing
The Replica test allows the analysis of the metalic material and the fat..